Skip to content

Stainless steel hardware for doors, windows and glass.

Hinges, tower bolts, handles, stoppers, latches and glass connectors. Made in SS 202, 304 and 316, or other grades to order, at our works in Delhi.

Browse the catalogueSend an enquiry

Welded ball-bearing butt hinges fanned out in seven finishes on a dark studio ground
Material
SS 202, SS 304, SS 316; other grades to order
Finishes
Seven standard finishes; others made to order
Certification
ISO 9001, ISO 14001, ISO 45001
Listing
UL Listed ball-bearing hinges (UL 10C)

The catalogue

Every family is listed with its sizes, grades and finishes as printed in our trade catalogue. Lengths are shown on the drawing line.

Made to be looked at closely

Below is a 5 in two-bearing welded butt hinge from our range, marked up like a drawing. Each lettered detail is something you can check on the hinge in your hand.

UL Listed
4 × 3 × 3 and 5 × 3 × 3 ball-bearing hinges
Finishes
Seven standard; others to order
Grades
SS 202, SS 304, SS 316
Construction
Pin or welded, 2 or 4 bearings

See the hinge range

5 in two-bearing welded butt hinge, matt stainless steel. Lettered circles mark the details shown alongside.
  1. Macro view of the welded end of a matt stainless steel hinge barrel, with no visible pin head

    Detail A: Welded head

    On welded hinges the pin is fixed at both ends of the barrel. It cannot work loose, and the leaves cannot be lifted apart, so the door stays on its hinges.

  2. Macro view of a knuckle joint on a matt stainless steel hinge, with an even gap along the barrel

    Detail B: Even leaf gap

    The knuckle joints run tight and even along the barrel, so the leaves close parallel and the door hangs true, without binding at the frame.

  3. Macro view of a ball-bearing ring between two knuckles on a matt stainless steel hinge

    Detail C: Smooth movement

    Ball bearings sit between the knuckles and carry the weight of the door, so the leaves turn on steel balls instead of grinding face to face. Two bearings for standard doors, four for heavier ones.

  4. Macro view of a countersunk screw hole in a matt stainless steel hinge leaf

    Detail D: Countersunk holes

    Screw holes are countersunk, so the screw head sits level with the leaf. The hinge closes fully, and nothing stands proud to catch the frame.

  5. Macro view of the UL Listed door hinges stamp, R41718, 3 hrs fire rated, in a matt stainless steel hinge leaf

    Detail E: UL Listed

    Our 4 × 3 × 3 and 5 × 3 × 3 ball-bearing hinges are UL Listed to UL 10C, the standard for fire tests of door assemblies. The mark is stamped into the leaf, where it stays for the life of the hinge.

Welded ball-bearing butt hinges fanned out, one in each of the seven standard finishes

Three grades. Seven finishes.

SS 202 for dry interiors, SS 304 for most doors and windows, SS 316 where there is salt or chlorine in the air, and other grades are made to order. Every product comes in matt stainless, mirror, grey, matt black, PVD gold, antique brass or rose gold, and other finishes are made to order.

Compare grades and finishes

Made under other brands' names

Most of what we make is OEM: hinges and hardware made to a brand's specification and sold under its name. We also sell under our own brand, Unistyle.

How OEM orders work

Our matt stainless steel range on a dark ground: ball-bearing, radius, spring, flap and lift-off hinges, tower bolts, door stoppers, a door stop post, latches and a glass connector